This next generation Latch & Link safety harness will soon be the standard by which all others are measured. Simpson is offering a revolutionary new polyester webbing design that provides improved protection without sacrificing comfort. The latch and adjusters are a revised design for easier and better performance. Offered in a Platinum color only. SFI 16.5 approved.
Polyester webbing adds 20% increase in tensile strength.
Redesigned webbing and adjusters provide additional protection without sacrificing comfort.
Drivers report better retention with new adjusters.
Improved restraint performance on test sleds and actual racing conditions.
Less elongation under load.
Better ultraviolet/chemical resistance and less moisture retention.
6-point belts keep the pelvis back while allowing proper upper body rotation.
SFI 16.5 approved.
No left side adjuster.
Dated hardware for traceability.
Bolt-In style restraint mounts.
Note: ''Pull-Up Lap Belt Adjusters'' & ''Pull-Down Lap Belt Adjusters'' indicates the direction that tightens the Lap belt adjuster's. For example, a ''Pull-Up Lap Belt Adjuster'' is always the best choice in a Dragster. It is much easier, and safer, to tighten your belts in an upward motion (towards the Latch & Link) rather than a downward motion (away from the Latch & Link) because of the limited cockpit room.
)
){kind=link}
